The Parflare Fittings are ideally suited for any ultrapure or corrosive chemical application. The fitting design yields a leak tight connection with minimal dead volume and can be used in side loading and vibrational applications. The connection is achieved by a heated flaring process utilizing an external heat source (HG Heat Gun) and PTFE mandrel (MFT Manual Flaring Tool), or by using Partek’s optional FG Series Electronic Flare Gun. Parflare PFA fittings are supplied with PVDF nuts as standard. For PFA nuts add -T suffix to part number. For High Temperature nut assemblies add -HT suffix to part number (1/4" - 1" sizes only). Please consult factory for other available configurations, materials, and custom assemblies.

• PFA body manufactured from virgin High Purity PFA materials.

• Ease of assembly.

• Leak tight seal.

• Numerous configurations including Redi-flare end connections.

• Less surface particulates, TOC, and anions resulting in cleaner operation.

• Reduced assembly time, and costs.

• Less downtime.

• Reduced system complexity and cost.

Materials of Construction:

Wetted Surfaces: PFA Body

External Surfaces: PVDF Nut (standard); PFA Nut (add -T suffix to part number); Titanate Filled PFA Nut & Titanate Filled ETFE Gripper (For High Temperature nut assemblies, add -HT suffix to part number, 1/4" - 1" sizes only).

Pressure Ranges:

125 PSIG (8.6 bar) and see Pressure/Temperature Charts.

Temperature Ranges:

PVDF Nuts: Up to 212°F (100°C); PFA Nuts: Up to 266°F (130°C); HT Nut Assemblies: > 266°F (130°C); See Pressure/Temperature Charts.